PURLINE for clicking in
In small spaces in particular, for example in living areas, PURLINE planks are ideal – they are easy to handle and require almost no preparatory work. Furthermore, so that it is even easier for you to enhance rooms in a sustained manner, our environmentally friendly and innovative flooring solution is now also available for clicking in – with our specially developed connect technology, the flooring is just as easy and quick to install as our design flooring. The advantages are clear: PURLINE for clicking in is installed especially quickly thanks to our connect locking technology – a process that doesn’t involve unpleasant odours, dirty hands or construction noise as you’ll only need a cutter knife and a white rubber hammer. The flooring can be walked on straight away and is particularly easy to remove, giving you maximum flexibility in terms of design and renovation.
PURLINE for gluing
Of course, we also offer PURLINE planks for gluing. This is a design that is always particularly practical when the toughest demands are placed on the functionality and durability of the floor covering, as thanks to its strong bond to the subsurface, the flooring is protected against distortion and thereby also withstands heavy loads without being affected in the slightest. If you would like to install flooring in especially large areas, the rolled version of PURLINE is ideal: supplied in the standard format–2-m wide and 20-m long–the design means that particularly large spaces can also be covered quickly and in a sustainable manner. Using a hooked blade, you can easily cut out the recesses required. Thanks to the low installation height of maximum 2.5 mm, both types are also ideal for renovation work and refurbishments – in areas that are frequented particularly regularly too.
Both designs are easy to install and the process doesn't result in any mess: Simply apply glue, position the planks on the glue and then make the finishing touches.
Please note: All flooring must acclimatise to a temperature of >18°C in the room where it is to be installed for at least 24 hours before installation. Keep the packages in a flat position and on a clean, dry and even substrate. The corresponding installation instructions give detailed guidance.